LM2751SD-B
| Parameters | |
|---|---|
| Base Part Number | LM2751 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.8V |
| Output Current | 150mA |
| Max Output Voltage | 4.5V |
| Voltage - Output | 4.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.8V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 725kHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
LM2751SD-B Overview
The 10-WFDFN Exposed Pad package saves space on the board. This LED driver has 1 outputs.We are using Surface Mount as the mounting method.It is highly reliable and high-performing when it emerges as a DC DC Regulator.It is capable of working normally at -40°C~85°C TA.There are considerable benefits for Backlight.It operates with 10 terminations.To form its configuration, 10 pins are used.There are 2 segments.This is mounted by Surface Mount.It is under the base part number LM2751 that the LED driver can be found.As a maximum value, 5.5V is acceptable.The voltage output by it is 4.5V.10 pins are included in it.Depending on its characteristics, it is classified into Display Drivers.With 2.8V as the minimal input voltage, it operates.A minimum supply voltage of 2.8V is required to meet the highest efficiency standards.There is 5.5V maximum value for supply current.Loads can only be powered by 150mA current.Electronic components can function properly when their switching frequency is set to 725kHz.It is not recommended to exceed 4.5V in the output voltage.
LM2751SD-B Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 725kHz
LM2751SD-B Applications
There are a lot of Texas Instruments LM2751SD-B LED Driver ICs applications.
- OLED power supply for portable equipment
- LED Lighting PFCs, Linear Dimmable
- A- lamps
- Auxiliary lights for on-vehicle cameras
- Scanners and Handy Terminals
- Panel lighting
- Gallery lighting
- Linear fluorescent
- Industrial LED Lighting: Image Recognition Devices
- Stage and Studio lighting
