LM2751SD-B/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 725kHz |
| Base Part Number | LM2751 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Efficiency | 83 % |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.8V |
| Output Current | 150mA |
| Max Supply Current | 1.5mA |
| Quiescent Current | 1mA |
| Voltage - Output | 4.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.8V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 725kHz |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2751SD-B/NOPB Overview
To save space on the board, it has a 10-WFDFN Exposed Pad package. 1 outputs are designed into LED drivers.The mounting method is Surface Mount.With high reliability and efficiency, this emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature and it works fine.There are considerable benefits for Backlight.The frequency of 725kHz is used as the basis for its operation.It operates with 10 terminations.The base is configured with 10 pins.There are estimated to be 2 segments.Surface Mount is mounted on it.It's under the LM2751 base part number.There is no problem with the voltage of 5.5V.It has a voltage output of 4.5V.There are 10 pins on it.Furthermore, it can be classified as Display Drivers based on its characteristics.This device requires a minimum input voltage of 2.8V.As a result, it runs at a minimal voltage of 2.8V in order to achieve the best efficiency.When the maximum supply current is allowed, the value reaches 5.5V.Whenever the supply current is lower than 1.5mA, it can provide high efficiency.Loads can only be powered by 150mA current.When the switching frequency is maintained at 725kHz, this electronic component is able to fully play its functions.There is no external factor that consumes current when there is 1mA current consumption.
LM2751SD-B/NOPB Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 725kHz
Supply voltage of 3.6V
Switching frequency of 725kHz
LM2751SD-B/NOPB Applications
There are a lot of Texas Instruments LM2751SD-B/NOPB LED Driver ICs applications.
- OLED power supply for portable equipment
- LED Lightings for Inspection Devices
- Replacement lamps
- Down lighting
- Street lighting
- Dimmable LED for vehicle interiors
- LED Lighting PFCs, Linear Dimmable
- Stage Lighting and Signage
- Down lights
- Flicker-free LED Lighting using R1580N
