LM2751SDX-A
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2751 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.6V |
| Voltage - Output | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Voltage - Supply (Min) | 2.8V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2751SDX-A Overview
In order to save board space, the led driver uses the 10-WFDFN Exposed Pad package. It has 1 outputs for LED drivers.To mount, use Surface Mount.In this case, the result is a DC DC Regulator with high efficiency.The led light driver operates normally at -40°C~85°C TA. Taking advantage of Backlight has considerable benefits.The terminations 10 are designed for its operation.With 10 pins at the base, this LED driver has a base configuration.It is inevitable that there will be undetermined failures when the supply voltage is less than 2.8V.A total of 2 segments are estimated.It has been mounted on Surface Mount.LM2751 is the base part number for the LED driver.The voltage at the output terminal is 5V.In addition, it has 10 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.It is necessary to use 5.5V voltage to power systems.
LM2751SDX-A Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
LM2751SDX-A Applications
There are a lot of Texas Instruments LM2751SDX-A LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Stage Lighting and Signage
- LED Lightings for Inspection Devices
- Portable lighting
- Other Electronic Devices
- LED backlight driver for LCD displays for portable equipment
- Down lights
- General lighting
- Panel lighting
- Dimmable LED for vehicle interiors
