LM2753SD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2753 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Efficiency | 68 % |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 200mA |
| Max Output Voltage | 5V |
| Voltage - Output | 4.75V~5.25V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 400mA Flash |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 1 |
| Switching Frequency | 725kHz |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2753SD Overview
10-WFDFN Exposed Pad package saves space on the board. LED drivers have a total of 1 outputs that are used in the design of the drivers.In this case, mounting method is Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Camera Flash has significant advantages.In this case, the terminations are set to 10.There are 10 pins on the base of this LED driver.There are estimated to be 1 segments.It has been mounted on Surface Mount.It is under the base part number LM2753 that you can find this LED driver.There is no problem with the voltage of 5.5V.4.75V~5.25V is the output voltage.This device contains 10 pins.Further, it can be classified as Display Drivers based on its characteristics.As its minimal input voltage, it operates at a voltage of 3V.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.In the case of supply current, there is a maximum value of 5.5V.A load can be supplied with 200mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 725kHz.The output voltage should not be in excess of 5V.
LM2753SD Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 725kHz
LM2753SD Applications
There are a lot of Texas Instruments LM2753SD LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Dimmable LED for vehicle interiors
- Architectural lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- White LED Backlight for portable equipment
- Stage and Studio lighting
- Auxiliary lights for on-vehicle cameras
- Down lights
- Down lighting
- LED Lightings for Industrial Equipment
