LM2754SQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2754 |
| Number of Outputs | 4 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.8V |
| Nominal Supply Current | 8mA |
| Output Current | 800mA |
| Max Supply Current | 8mA |
| Quiescent Current | 3.4mA |
| Voltage - Output | 4.7V~5.1V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.8V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 200mA Flash |
| Internal Switch(s) | Yes |
| Number of Segments | 4 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2754SQ/NOPB Overview
Additionally, there is a 24-WFQFN Exposed Pad package for saving space.For the design of this LED driver, 4 outputs are used.Mounting is done according to the Surface Mount method.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.It is possible for the led driver ic to function normally at -40°C~85°C TA.The benefits it provides to Camera Flash are considerable.In order for it to operate, it has 24 terminations.The base of this board is configured as 24 pins.The segment count is 4.I have mounted it by Surface Mount.LM2754 is the base part number for the LED driver.As a maximum value, 5.5V is acceptable.This device produces a voltage of 4.7V~5.1V volts.Further, it can be classified as Display Drivers based on its characteristics.It operates with the minimal input voltage of 2.8V.The system operates at a minimum supply voltage of 2.8V in order to achieve maximum efficiency.In terms of supply current, there is a maximum value of 5.5V.When the maximum supply current is less than 8mA, this device is able to provide high efficiency.There is no current available to supply to the load.This electronic component may perform its functions fully if the switching frequency is maintained at 1MHz.3.4mA current is consumed in the case of no external factors.
LM2754SQ/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
LM2754SQ/NOPB Applications
There are a lot of Texas Instruments LM2754SQ/NOPB LED Driver ICs applications.
- Stage Lighting and Signage
- Street lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Auxiliary lights for on-vehicle cameras
- Sports Facility Lighting
- Down lighting
- Stage and Studio lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Architectural lighting
- A- lamps
