LM2755TMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-WFBGA |
| Number of Pins | 18 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Base Part Number | LM2755 |
| Number of Outputs | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1mA |
| Output Current | 90mA |
| Quiescent Current | 1mA |
| Topology | Switched Capacitor (Charge Pump) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 3 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2755TMX/NOPB Overview
There is a 18-WFBGA package on the board that is used to save space. LED drivers have a total of 3 outputs that are used in the design of the drivers.Mounting is done according to the Surface Mount method.It emerges as a DC DC Regulator, which is efficient and reliable.It is possible for the led driver ic to operate normally at -30°C~85°C TA.Backlight has many advantages.The operation of this system is supported by 18 terminations.It is configured with 18 pins as its base.If the voltage supply is below 2.7V, undetermined failures may occur.There are 3 segments.Surface Mount is mounted in the way.Part number LM2755 represents this LED driver.There is no problem with the voltage of 5.5V.Furthermore, it can be classified as Display Drivers based on its characteristics.As a result, it runs at a minimal voltage of 2.7V in order to achieve the best efficiency.Loads can only be powered by 90mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 1.25MHz.No external factors result in 1mA current consumption.
LM2755TMX/NOPB Features
Available in the 18-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.25MHz
LM2755TMX/NOPB Applications
There are a lot of Texas Instruments LM2755TMX/NOPB LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Scanners and Handy Terminals
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- White LED Backlight for portable equipment
- Stage Lighting and Signage
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Other Electronic Devices
- General lighting
- Down lights
