LM2756TM/NOPB
| Parameters | |
|---|---|
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 8 |
| Switching Frequency | 1.3MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM2756 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 2.1mA |
| Output Current | 180mA |
| Max Supply Current | 2.5mA |
| Quiescent Current | 2.1mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 30mA |
LM2756TM/NOPB Overview
Space is saved using its 20-WFBGA package. The mounting method is Surface Mount.As a DC DC Regulator, it has high efficiency and reliability.If the led driver ic is set to -30°C~85°C TA, it will work normally.It provides considerable benefits for Backlight.It operates using 20 terminations.The base is configured with 20 pins.A voltage supply less than 2.7V could result in undetermined failures.There are 8 segments.It is mounted in the way of Surface Mount.It can be found under the part number LM2756.Ideally, the supply voltage should be 5.5V.2V~4V is the voltage output.As a result, it can also be classified as Display Drivers.The system works with a minimum supply voltage of 2.7V in order to achieve maximum efficiency.When the maximum supply current is less than 2.5mA, this device is able to provide high efficiency.In this case, the load can only be supplied with 180mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 1.3MHz.A current of 2.1mA is consumed in the absence of external influences.
LM2756TM/NOPB Features
Available in the 20-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.3MHz
LM2756TM/NOPB Applications
There are a lot of Texas Instruments LM2756TM/NOPB LED Driver ICs applications.
- Refrigeration lighting
- LED backlight driver for LCD displays for portable equipment
- OLED power supply for portable equipment
- LED Lightings for Inspection Devices
- Portable lighting
- Stage Lighting and Signage
- Scanners and Handy Terminals
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Dimmable LED for vehicle interiors
- LED Lightings for Industrial Equipment
