LM2756TMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM2756 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 2.1mA |
| Quiescent Current | 2.1mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 8 |
| Switching Frequency | 1.3MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2756TMX/NOPB Overview
The 20-WFBGA package conserves board space. In this case, mounting method is Surface Mount.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.If the led driver ic is set to -30°C~85°C TA, it will work normally.The benefits it provides to Backlight are considerable.It is designed to work with 20 terminations.The base of this board is configured as 20 pins.If the voltage supply is below 2.7V, undetermined failures may occur.8 segments exist.There is a mounting of it by Surface Mount.It can be found under the part number LM2756.5.5V is an acceptable maximum value for the supply voltage.This device produces a voltage of 2V~4V volts.Moreover, it can be classified as Display Drivers due to its characteristics.As a result, it is designed to operate at a minimal voltage of 2.7V to ensure the most efficiency possible.This electronic component may perform its functions fully if the switching frequency is maintained at 1.3MHz.No external factors result in 2.1mA current consumption.
LM2756TMX/NOPB Features
Available in the 20-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.3MHz
LM2756TMX/NOPB Applications
There are a lot of Texas Instruments LM2756TMX/NOPB LED Driver ICs applications.
- Stage Lighting and Signage
- Gallery lighting
- A- lamps
- Portable lighting
- Constant Voltage Power Source for portable equipment
- Dimmable LED for vehicle interiors
- Other Electronic Devices
- LED Lighting PFCs, Linear Dimmable
- LED Lightings for Inspection Devices
- Panel lighting
