LM2758TLX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFBGA |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2758 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 700mA |
| Quiescent Current | 4mA |
| Voltage - Output | 2.7V~5.3V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Number of Segments | 1 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Height | 675μm |
| Length | 2mm |
| Width | 1.8mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2758TLX/NOPB Overview
Board space is saved by its 12-WFBGA package.In this LED driver, there are 1 outputs.Surface Mount is used to mount the led light driver.With high efficiency, it emerges as a DC DC Regulator.It is capable of working normally at -40°C~85°C TA.Taking advantage of Camera Flash has considerable benefits.It operates with 12 terminations.The LED light driver is configured with a base of 0 pins.Undetermined failures may occur if the voltage supply falls below 2.7V.It is estimated that there are 1 segments.It's mounted by Surface Mount.It's under the LM2758 base part number.The supply voltage of 5.5V is an acceptable maximum value.This device has an output voltage of 2.7V~5.3V volts.In addition, it can also be categorized into Display Drivers based on its characteristics.As a result, it runs at a minimal voltage of 2.7V in order to achieve the best efficiency.Loads can only be powered by 700mA current.This electronic component can fully perform its functions when the switching frequency is kept at 1.25MHz.Absent external factors, there is 4mA consumption of current.
LM2758TLX/NOPB Features
Available in the 12-WFBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.25MHz
LM2758TLX/NOPB Applications
There are a lot of Texas Instruments LM2758TLX/NOPB LED Driver ICs applications.
- Sports Facility Lighting
- OLED power supply for portable equipment
- General lighting
- Museum lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Other Electronic Devices
- Industrial LED Lighting: Image Recognition Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- A- lamps
- Replacement lamps
