LM2759SDX/NOPB
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM2759 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 1A |
| Quiescent Current | 3.4mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1A Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 1 |
| Switching Frequency | 1MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
LM2759SDX/NOPB Overview
Additionally, there is a 12-WFDFN Exposed Pad package for saving space.LED drivers have a total of 1 outputs that are used in the design of the drivers.It is possible to mount the led driver using Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -30°C~85°C TA.Camera Flash provides many benefits.In this case, it operates with terminations of 0.It has a base of 12 pins.If the voltage supply is lower than 2.7V, undetermined failures may occur.1 segments are present.It's mounted in Surface Mount.It can be found under the part number LM2759.5.5V is a maximum acceptable voltage for the supply.There is 2V~4V voltage output from the device.In addition to Display Drivers, it is also classified by its characteristics.A minimum supply voltage of 2.7V is required to meet the highest efficiency standards.It is possible to supply the load with 1A current.Electronic components can function properly when their switching frequency is set to 1MHz.No external factors cause 3.4mA current to be consumed.
LM2759SDX/NOPB Features
Available in the 12-WFDFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
LM2759SDX/NOPB Applications
There are a lot of Texas Instruments LM2759SDX/NOPB LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Scanners and Handy Terminals
- A- lamps
- Linear fluorescent
- Stage and Studio lighting
- Stage Lighting and Signage
- Gallery lighting
- LED backlight driver for LCD displays for portable equipment
- Down lights
