LM2773TL/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA |
| Number of Pins | 9 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2773 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.8V |
| Output Type | Programmable |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Operating Supply Current | 5mA |
| Output Configuration | Positive |
| Current - Output | 300mA |
| Quiescent Current | 48μA |
| Voltage - Output (Min/Fixed) | 1.6V 1.8V |
| Topology | Charge Pump |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1.15MHz |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.8V |
| Switcher Configuration | BUCK |
| Height | 675μm |
| Length | 2mm |
| Width | 1.8mm |
| Thickness | 675μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2773TL/NOPB Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. There are 9 terminations in this voltage regulator. As this regulator voltage is equipped with an analog IC of the type SWITCHED CAPACITOR REGULATOR, it is a SWITCHED CAPACITOR REGULATOR-type voltage regulator. The harley voltage regulator is available as a 9-WFBGA package to save space. A total of 1 outputs are configured in this voltage regulator. DC DC switching regulators like this one generate Programmable outputs on their output pins to handle the power management. The voltage regulator 12v fits the Surface Mount mounting hole. Operating at -30°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. A DC-DC switching regulator of this type operates at a switching frequency of 1.15MHz. There is a adjusting voltage regulator's voltage output (Min/Fixed) of 1.6V 1.8V. This voltage regulator 12v offers maximum design flexibility with an output current of 300mA. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. As a member of the LM2773 family of DC/DC regulators, this is a DC/DC regulator. At 1.8V volts, voltage regulator can provide voltage. 9 pins are used for switching regulator operation. In order for this switching regulator to work properly, the output voltage should be at least 1.8VV. Voltage regulator consumes 48μA A of quiescent current without being affected by outside forces. A dc to dc voltage regulator's dc to dc voltage regulator's minimum supply voltage of 2.5V V ensures reliable performance. As long as the supply voltage is greater than 5.5V, the voltage regulator 12v will operate correctly. A 5mA supply current is required to power this voltage regulator.
LM2773TL/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
9 pins
LM2773TL/NOPB Applications
There are a lot of Texas Instruments LM2773TL/NOPB Voltage Regulators applications.
- Telecommunications equipment
- Electric water heaters
- Surge protection circuits
- Computer monitoring equipment of building
- Energy management systems
- Direct power supply system
- Product testing
- Die casting equipment
- Window air conditioners
- Experimental setup
