LM2795TLX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFBGA |
| Number of Pins | 14 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2795 |
| Pin Count | 14 |
| Number of Outputs | 4 |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 5.5mA |
| Quiescent Current | 5.5mA |
| Voltage - Output | 3.8V |
| Topology | Switched Capacitor (Charge Pump) |
| Switcher Configuration | DOUBLER INVERTER |
| Current - Output / Channel | 20mA |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 515kHz |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.675mm |
| Width | 2.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2795TLX/NOPB Overview
Its 14-WFBGA package is used to save board space. A LED driver using this design has 4 outputs.It is mounted using Surface Mount.With high efficiency, it appears as a DC DC Regulator.The led light driver is capable of operating at the operating temperature of -30°C~85°C TA.Backlight has considerable advantages.In this case, the terminations are set to 14.It has a base of 14 pins.If the voltage supply is below 2.7V, undetermined failures may occur.It's mounted by Surface Mount.LED drivers are found under the base part number LM2795.It is acceptable to supply voltages of 5.5V.The voltage at the output terminal is 3.8V.14 pins are used on the device.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2.7V.This electronic component can fully perform its functions when the switching frequency is kept at 515kHz.The consumption of current is 5.5mAin the absence of external factors.The circuit is assigned 3.6V volts when the device is in operation.
LM2795TLX/NOPB Features
Available in the 14-WFBGA package
Operating temperature of -30°C~85°C TA
Switching frequency of 515kHz
LM2795TLX/NOPB Applications
There are a lot of Texas Instruments LM2795TLX/NOPB LED Driver ICs applications.
- Scanners and Handy Terminals
- A- lamps
- Stage Lighting and Signage
- High-end retail lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Replacement lamps
- Constant Voltage Power Source for portable equipment
- Other Electronic Devices
- Architectural lighting
- Street lighting
