LM27964SQ-C/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM27964 |
| Number of Outputs | 7 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.3mA |
| Output Current | 180mA |
| Max Supply Current | 1.3mA |
| Quiescent Current | 1.3mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 30mA 80mA |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 22 |
| Switching Frequency | 700kHz |
| Touchscreen | Capacitive |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM27964SQ-C/NOPB Overview
Save board space with 24-WFQFN Exposed Pad package. LED drivers with this design have 7 outputs.In this case, mounting method is Surface Mount.DC DC Regulator emerges with high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -30°C~85°C TA.Backlight benefits significantly from the program.It operates with terminations of 24.Its configuration is based on 24 pins.It is estimated that there are 22 segments.I have mounted it by Surface Mount.LED drivers can be found under the base part number LM27964.It is acceptable to have a maximum voltage of 5.5V.The output voltage is 2V~4V.Further, it can be classified as Display Drivers based on its characteristics.A minimal input voltage of 2.7V is required for it to operate.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 2.7V.When the maximum supply current is allowed, it reaches 5.5V.When the maximum supply current is below 1.3mA, the device can deliver high efficiency.A load can be supplied with 180mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 700kHz.A current of 1.3mA is consumed in the absence of external influences.
LM27964SQ-C/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Switching frequency of 700kHz
LM27964SQ-C/NOPB Applications
There are a lot of Texas Instruments LM27964SQ-C/NOPB LED Driver ICs applications.
- General lighting
- A- lamps
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- Replacement lamps
- LED Lightings for Inspection Devices
- Street lighting
- Portable lighting
- High-end retail lighting
- LED Lightings for Industrial Equipment
