LM27964SQX-C/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM27964 |
| Number of Outputs | 7 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Nominal Supply Current | 1.3mA |
| Max Supply Current | 1.3mA |
| Quiescent Current | 1.3mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Current - Output / Channel | 30mA 80mA |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 6 |
| Switching Frequency | 700kHz |
| Voltage - Supply (Min) | 2.7V |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM27964SQX-C/NOPB Overview
To save board space, it uses the 24-WFQFN Exposed Pad package. It has 7 outputs for LED drivers.In this case, mounting method is Surface Mount.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.It is capable of working normally at -30°C~85°C TA.As a result, Backlight is likely to benefit greatly.In order for it to operate, it has 24 terminations.This LED driver is configured with a base of 24 pins.If the voltage supply is less than 2.7V, undetermined failures will occur.Segments counted are 6.It is mounted in the way of Surface Mount.A base part number of LM27964 is associated with this LED driver.Its output voltage is 2V~4V.Further, its characteristics allow it to be classified as Display Drivers.If the maximum current supply is less than 1.3mA, this device provides high efficiency.There is 5.5V internal voltage required to power systems.This electronic component may perform its functions fully if the switching frequency is maintained at 700kHz.When no external factors are present, there is 1.3mA current consumption.
LM27964SQX-C/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Operating with the supply voltage of 5.5V
Switching frequency of 700kHz
LM27964SQX-C/NOPB Applications
There are a lot of Texas Instruments LM27964SQX-C/NOPB LED Driver ICs applications.
- Refrigeration lighting
- Stage Lighting and Signage
- Dimmable LED for vehicle interiors
- Amusement Machines
- LED headlights
- Sports Facility Lighting
- Medical surgery lighting
- OLED power supply for portable equipment
- Down lighting
- LED Lightings for Industrial Equipment
