banner_page

LM27965SQ-M/NOPB

3/5V 0.5mm PMIC LM27965 24 Pin 3.6V 24-WFQFN Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM27965SQ-M/NOPB
  • Package: 24-WFQFN Exposed Pad
  • Datasheet: -
  • Stock: 852
  • Description: 3/5V 0.5mm PMIC LM27965 24 Pin 3.6V 24-WFQFN Exposed Pad (Kg)

Details

Tags

Parameters
Subcategory Display Drivers
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.6V
Terminal Pitch 0.5mm
Base Part Number LM27965
Number of Outputs 9
Power Supplies 3/5V
Number of Channels 8
Max Supply Voltage 5.5V
Min Supply Voltage 2.7V
Nominal Supply Current 2.9mA
Output Current 180mA
Max Supply Current 3.32mA
Quiescent Current 2.9mA
Voltage - Output 2V~4V
Topology Switched Capacitor (Charge Pump)
Output Characteristics CONSTANT-CURRENT
Input Characteristics STANDARD
Current - Output / Channel 30mA
Internal Switch(s) Yes
Dimming I2C
Number of Segments 9
Switching Frequency 1.27MHz
Voltage - Supply (Min) 2.7V
Multiplexed Display Capability NO
Touchscreen Capacitive
Data Input Mode SERIAL
Height 800μm
Length 4mm
Width 4mm
Thickness 750μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-WFQFN Exposed Pad
Number of Pins 24
Operating Temperature -30°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Type DC DC Regulator
Terminal Finish Matte Tin (Sn)
Applications Backlight

LM27965SQ-M/NOPB Overview


The 24-WFQFN Exposed Pad package conserves board space. In this LED driver, there are 9 outputs.Surface Mount is used to mount the led driver.This emerges as a DC DC Regulator with high efficiency and reliability.The led light driver is capable of operating at the operating temperature of -30°C~85°C TA.Taking advantage of Backlight has considerable benefits.It operates with 24 terminations.To form its configuration, 24 pins are used.It is inevitable that there will be undetermined failures when the supply voltage is less than 2.7V.There are 9 segments.I have mounted it by Surface Mount.LED drivers are found under the base part number LM27965.It is acceptable to have a maximum voltage of 5.5V.There is 2V~4V voltage output from it.Further, its characteristics allow it to be classified as Display Drivers.To meet high efficiency standards, it works with a voltage of 2.7V.As long as the maximum supply current is less than 3.32mA, this device is capable of providing high efficiency.A load can be supplied with 180mA current.This electronic component may perform its functions fully if the switching frequency is maintained at 1.27MHz.There is no external factor that consumes current when there is 2.9mA current consumption.Transmission is available on 8 channels.

LM27965SQ-M/NOPB Features


Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.27MHz

LM27965SQ-M/NOPB Applications


There are a lot of Texas Instruments LM27965SQ-M/NOPB LED Driver ICs applications.

  • LED backlight driver for LCD displays for portable equipment
  • Stage and Studio lighting
  • Museum lighting
  • LED headlights
  • A- lamps
  • Scanners and Handy Terminals
  • Other Electronic Devices
  • Medical surgery lighting
  • White LED Backlight for portable equipment
  • Constant Voltage Power Source for portable equipment

Write a review

Note: HTML is not translated!
    Bad           Good