LM27965SQX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Current Rating | 30mA |
| Base Part Number | LM27965 |
| Number of Outputs | 9 |
| Power Supplies | 3/5V |
| Number of Channels | 8 |
| Max Supply Voltage | 5.5V |
| Nominal Supply Current | 2.9mA |
| Quiescent Current | 2.9mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 30mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 9 |
| Switching Frequency | 1.27MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Data Input Mode | SERIAL |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM27965SQX/NOPB Overview
The 24-WFQFN Exposed Pad package saves space on the board. In this LED driver, there are 9 outputs.As a mounting method, Surface Mount is used.In this case, the DC DC Regulator emerges as highly efficient and reliable.-30°C~85°C TA is the operating temperature and it works fine.The benefits of Backlight, Lighting are considerable.The terminations 24 are designed for its operation.In this LED driver, the base is configured as 24.Undetermined failures can occur if the voltage supply is below 2.7V.9 segments are present.It has been mounted on Surface Mount.The base part number for this LED driver is LM27965.It is acceptable to supply voltages of 5.5V volts.The output voltage is 2V~4V.This model is designed to offer 5.5V as its maximum supply voltage.Additionally, it is categorized into Display Drivers according to its characteristics.The electronic component can fully perform its functions if the switching frequency is maintained at 1.27MHz.There is no external factor that consumes current when there is 2.9mA current consumption.A total of 8 channels are currently available for transmission.
LM27965SQX/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.27MHz
LM27965SQX/NOPB Applications
There are a lot of Texas Instruments LM27965SQX/NOPB LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Dimmable LED for vehicle interiors
- Portable lighting
- LED Lightings for Inspection Devices
- Stage Lighting and Signage
- Gallery lighting
- Replacement lamps
- Linear fluorescent
- Auxiliary lights for on-vehicle cameras
- Constant Voltage Power Source for portable equipment
