LM27966SQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM27966 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 2.9mA |
| Output Current | 180mA |
| Max Supply Current | 3.32mA |
| Quiescent Current | 2.9mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 6 |
| Switching Frequency | 1.27MHz |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM27966SQ/NOPB Overview
Board space is saved by its 24-WFQFN Exposed Pad package.Surface Mount is used to mount the led driver.As a DC DC Regulator, it has high efficiency and reliability.LED drivers capable of operating at -30°C~85°C TA can be used.Backlight has considerable advantages.A termination of 24 is used to operate the LED driver.A configuration of this chip is made up of 24 pins.We estimate that there are 6 segments.On the Surface Mount, a device is mounted.There is a base part number LM27966 for this LED driver.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.It has a voltage output of 2V~4V.According to its characteristics, it is also classified into Display Drivers.This device operates with a minimum input voltage of 2.7V volts.The maximum efficiency can be achieved by operating it at a minimal voltage of 2.7V.When the maximum supply current is allowed, it reaches 5.5V.When the maximum supply current is below 3.32mA, the device can deliver high efficiency.There is no current that can be supplied to the load.Having the switching frequency at 1.27MHz enables this electronic component to perform at its best.2.9mA current is consumed in the case of no external factors.
LM27966SQ/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.27MHz
LM27966SQ/NOPB Applications
There are a lot of Texas Instruments LM27966SQ/NOPB LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for portable equipment
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- Architectural lighting
- LED Lightings for Industrial Equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- General lighting
- Sports Facility Lighting
- Panel lighting
