LM2842YQMK/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM2842 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 34V |
| Output Type | Adjustable |
| Max Output Current | 600mA |
| Operating Supply Voltage | 42V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 1.3mA |
| Max Output Voltage | 34V |
| Voltage - Output (Min/Fixed) | 0.765V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.25MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 765mV |
| Voltage - Output (Max) | 34V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2842YQMK/NOPB Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. In this voltage regulator, there are a total of 6 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. Space-saving SOT-23-6 Thin, TSOT-23-6 packages are available for this harley voltage regulator. 1 outputs have been configured in the voltage regulator 12v. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. In this voltage regulator 12v, the switching frequency is 1.25MHz. This voltage regulator is able to operate with the minimal input voltage of 4.5V. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.765V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 12V. This voltage regulator is included in the Switching Regulator or Controllers subcategory. In this case, the DC/DC regulator belongs to the family LM2842. A voltage of 34V volts can be produced by voltage regulator. During switching regulator operation, 6 pins are used. Ideally this switch regulator should have an output voltage of about 765mV at the very least. Accordingly, dc to dc voltage regulator's maximum output current is 600mA A. The maximal output voltage of 34V allows DC DC switching regulator to be operated easily. There is a maximum output voltage of 34V from this voltage regulator 12v. A switching DC-DC regulator, it is a member of the Automotive, AEC-Q100 family of electronic voltage regulator 12vs. DC-DC switching regulator with 42V supply voltage. No external factors affect how much current harley voltage regulator consumes.
LM2842YQMK/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 42V
LM2842YQMK/NOPB Applications
There are a lot of Texas Instruments LM2842YQMK/NOPB Voltage Regulators applications.
- CMM
- Flaw detection equipment
- Electrical power transmission
- Elevator lighting
- Handheld GPS
- Grinders
- Game consoles
- Hydro power
- Serial communication converter
- Electric water heaters
