LM2852YMXA-1.2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2852 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.2V |
| Output Type | Fixed |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.85V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 850μA |
| Voltage - Output (Min/Fixed) | 1.2V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.2V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2852YMXA-1.2 Overview
There is an optimized performance in this voltage regulator because it utilizes the Tube package. There are 14 terminations in this voltage regulator. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. For space-saving purposes, this voltage regulator is available in the 14-PowerTSSOP (0.173, 4.40mm Width) package. In this case, DC DC switching regulator has 1 outputs configured to it. On the output pins of this DC DC switching regulator, there is a Fixed output generated. A Surface Mount mounting is required for this switching regulator. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. There is a switching frequency of 500kHz for this voltage regulator 12v. This voltage regulator is able to operate with the minimal input voltage of 2.85V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.2V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 5V is provided. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. This DC/DC regulator belongs to the LM2852 family. The adjusting voltage regulator's output voltage is maintain at 1.2V. 14 pins are used for switching regulator operation. The output voltage of this voltage regulator 12v should at least be set at 1.2V volts at all times. The maximum output current reaches 2A A to meet the switching regulator operation requirements. A switching DC-DC regulator, it is a member of the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. 5.5V is the supply voltage for this DC-DC switching regulator. External factors do not affect voltage regulator's consumption of 850μA A of quiescent current.
LM2852YMXA-1.2 Features
1 outputs
Peak reflow temperature (Cel) of 260
14 pins
Operating supply voltage of 5.5V
LM2852YMXA-1.2 Applications
There are a lot of Texas Instruments LM2852YMXA-1.2 Voltage Regulators applications.
- Flaw detection equipment
- Wide-range voltage regulation circuits
- Constant current circuits
- Telecommunications equipment
- Energy management systems
- Program control systems
- Cutting machine tools
- Game consoles
- Refrigerators of central air conditioners
- Correction machines
