LM2852YMXA-1.8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2852 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.8V |
| Output Type | Fixed |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.85V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 850μA |
| Voltage - Output (Min/Fixed) | 1.8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.8V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2852YMXA-1.8 Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. This harley voltage regulator has 14 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. Space-saving 14-PowerTSSOP (0.173, 4.40mm Width) packages are available for this harley voltage regulator. There are 1 outputs configured on this voltage regulator 12v. There are output pins on this DC DC switching regulator that generate Fixed output. A Surface Mount mounting is required for this switching regulator. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. 500kHz is the switching frequency of this DC-DC switching regulator. Despite its low input voltage, this voltage regulator can operate. The adjusting voltage regulator's output voltage (Min/Fixed) is 1.8V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. An input voltage of 5V is required to meet the requirements of the switching regulator operation. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. As part of the LM2852 series of regulators, the voltage regulators can be found. Voltage can be produced at 1.8V volts by voltage regulator. During switching regulator operation, 14 pins are used. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 1.8V. A maximum output current of 2A A is provided to meet the switching regulator operation requirements. A switching DC-DC regulator, it is a member of the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. With 5.5V as the supply voltage, this DC-DC switching regulator will operate. Despite external influences, voltage regulator consumes 850μA A of quiescent current.
LM2852YMXA-1.8 Features
1 outputs
Peak reflow temperature (Cel) of 260
14 pins
Operating supply voltage of 5.5V
LM2852YMXA-1.8 Applications
There are a lot of Texas Instruments LM2852YMXA-1.8 Voltage Regulators applications.
- Automatic testing equipment
- Milling machines
- Automation technology
- Die casting equipment
- Printing
- Emergency lighting monitoring equipment
- Pipe bending machines
- Sensitive electronic devices
- Domestic water pumps
- Access control systems
