LM2853MH-1.2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2853 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.2V |
| Output Type | Fixed |
| Max Output Current | 3A |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 850μA |
| Voltage - Output (Min/Fixed) | 1.2V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2853MH-1.2 Overview
It is designed to provide optimal performance by utilizing the Tube package. Throughout this voltage regulator, there are 14 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. In order to save space, this harley voltage regulator is available in the 14-PowerTSSOP (0.173, 4.40mm Width) package. 1 outputs have been configured in the voltage regulator 12v. Fixed outputs are generated on the output pins of this adjusting voltage regulator. There is a switching regulator that is compatible with the Surface Mount mounting. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. There is a switching frequency of 550kHz for this voltage regulator 12v. A dc to dc voltage regulator's minimum input voltage of 3V is required for this voltage regulator to operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 1.2V. The maximum input voltage of this voltage regulator 12v is 5.5V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. Voltage regulator is designed to provide a nominal input voltage of 5V to meet the operation requirements. There is a subcategory of this regulator voltage called Switching Regulator or Controllers. There is a DC/DC regulator in this family that belongs to the LM2853 family. Voltage of voltage regulator can be delivered at 1.2V volts. In order to operate voltage regulator, 14 pins are required. A maximum output current of 3A A is available to meet the switching regulator operation requirements. A switching DC-DC regulator, it is a member of the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. Without external influences, harley voltage regulator consumes 850μAA of quiescent current.
LM2853MH-1.2 Features
1 outputs
Peak reflow temperature (Cel) of 260
14 pins
LM2853MH-1.2 Applications
There are a lot of Texas Instruments LM2853MH-1.2 Voltage Regulators applications.
- Electric water heaters
- Linear guide
- ATMs
- Medical monitoring systems
- Correction machines
- Wide-range voltage regulation circuits
- Alternators
- Laboratories
- Arc suppression circuits
- PSRR circuits
