LM2900N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | LM2900 |
| Pin Count | 14 |
| Operating Supply Voltage | 16V |
| Number of Channels | 4 |
| Operating Supply Current | 6.2mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 1.15W |
| Output Current | 18mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~32V ±2.2V~16V |
| Output Current per Channel | 18mA |
| Bandwidth | 2.5MHz |
| Unity Gain BW-Nom | 2500 kHz |
| Voltage Gain | 68.94dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 32V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Programmable Power | NO |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2900N Overview
There is a 14-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 14 pins that make up the linear amplifier. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 6.2mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 68.94dB. 4 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
LM2900N Features
14 Pins
supply voltage of 15V
68.94dB voltage gain
LM2900N Applications
There are a lot of Texas Instruments LM2900N Instrumentational OP Amps applications.
- Multimedia playback equipment
- Communication device
- Scintillation detectors
- Tablets
- Measurements of Wheatstone bridge
- Computer workstations
- Digital cameras
- Division circuits
- Video conversion and routing
- Power transmission
