Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
122.413241mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
LM2901 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Collector, TTL |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
2mA |
Output Current |
20mA |
Max Supply Current |
2mA |
Quiescent Current |
2.5mA |
Response Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
100pA |
Input Offset Voltage (Vos) |
2mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.25μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
2mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2901AVQDRQ1 Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, MOS, Open-Collector, TTL is being used.The part is shipped by Tape & Reel (TR) .You can find 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator is possible to classify the chip as Differential .Electronic comparator has a total of 4 elements.The device is equipped with 14 pins.The recommended mounting type is Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.14 pins are present on the comparator.Try search LM2901 to get more pin-to-pin solutions for your special needs.The comparator displays a quiescent current of 2.5mA .There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires 2mA supply current.The compartator could be damaged if the current supply exceeds 2mA .This device requires 5V power supplies to operate.There is a maximum current that can be input into the device of 250nA .Comparator electronics follows that the voltage gain of the part is 100dB .The part belongs to the series of comparator Automotive, AEC-Q100 .Comparator electronics is acceptable to pack the device by TR .
LM2901AVQDRQ1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901AVQDRQ1 Applications
There are a lot of Texas Instruments LM2901AVQDRQ1 linear comparators applications.
- Automatic Test Equipment
- Window Comparators
- High-Speed Sampling Circuits
- Threshold Detectors
- Point of load regulators
- Mobile Phones and Tablets
- Industrial
- Factory automation & control
- Battery management and protection
- Battery-Powered Electronics