LM2901AVQPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 56.812444mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 32V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901AVQPWR Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .There is a CMOS, MOS, Open-Collector, TTL output type for this comparator.This device is designed in Tape & Reel (TR) case.The comparator has a total of 14 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Speaking of types, this is a typical Differential comparator.There are a total of 4 elements in it.There are 14 pins on this board.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator has 14 pins.You can find more pin-to-pin solutions for your special requirements by searching LM2901 .There is a quiescent current of 2.5mA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 2mA for normal use.The compartator could be damaged if the current supply exceeds 2mA .The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum of 250nA current into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.The device is packaged in TR and is often used in ADC circuits.
LM2901AVQPWR Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901AVQPWR Applications
There are a lot of Texas Instruments LM2901AVQPWR linear comparators applications.
- Portable Battery Monitoring
- Mobile Phones and Tablets
- Wearable Devices
- Portable and Battery-Powered Systems
- General-Purpose Portable Devices
- Threshold Detectors
- Window Comparators, Multivibrators
- DC/DC and AC/DC power supplies
- Zero-Crossing Detectors
- Mobile Communications
