LM2901AVQPWRG4Q1
| Parameters | |
|---|---|
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
LM2901AVQPWRG4Q1 Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.A comparator with an output type of CMOS, MOS, Open-Collector, TTL is being used.We ship the part through Tape & Reel (TR) .14 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In terms of type, this is a typical Differential comparator.Electronic comparator consists of 4 elements in total.As a result, it contains 14 pins.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 14 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM2901 .The comparator displays a quiescent current of 2.5mA .Mounting on PCBs or other boards is easy with the Surface Mount .For normal use of the device, the nominal supply current should be 2mA .A current supply greater than 2mA may cause the comparator to malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.A maximum current of 250nA can be supplied to the device.A voltage gain of 100dB can be determined from the voltage formula for the part.The part belongs to the Automotive, AEC-Q100 series of comparator parts.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LM2901AVQPWRG4Q1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901AVQPWRG4Q1 Applications
There are a lot of Texas Instruments LM2901AVQPWRG4Q1 linear comparators applications.
- Mobile Phones
- Threshold Detectors
- Consumer Medical Electronics
- Current and voltage sensing
- Motor drives
- Battery management and protection
- Alarm and Monitoring Circuits
- Laptop Computers
- Multivibrators and High-Voltage Digital Logic Gates
- Power management
