LM2901D
| Parameters | |
|---|---|
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1W |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Max Supply Current | 2mA |
| Current - Output | 16mA |
| Quiescent Current | 800μA |
| Response Time | 1.3 μs |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 250nA |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.5V |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
LM2901D Overview
In order to facilitate transportation, it is packaged in SOIC .This comparator is of the TTL output type.There are 14 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The total number of elements is 4 .As a result, it contains 14 pins.The comparator has 14 pins.In this comparator, the quiescent current is 800μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 2mA .A current supply greater than 2mA may cause the comparator to malfunction.In order to run the device, there are only 5V power supplies required.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .There is no need to exceed 105°C in terms of temperature.Temperatures below -40°C are not suitable for the device.36V is the maximum supply voltage of the comparator.There is a minimum supply voltage of 3V for this comparator.There is a high gain COMPARATOR amplifier at the heart of the comparator.16mA is the output current of this device.
LM2901D Features
TTL output capability
Employing 4 elements
Quiescent Current: 800μA
Voltage Gain: 100dB
COMPARATOR amplifier
LM2901D Applications
There are a lot of ON Semiconductor LM2901D linear comparators applications.
- High-Speed Differential Line Receiver
- Power Supervision
- Motor drives
- Window Comparators, Multivibrators
- Lithium ion battery monitoring
- Current and voltage sensing
- Automatic Test Equipment
- Metering Systems
- Industrial
- Body Control Modules
