Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 14-SOIC (0.154, 3.90mm Width) |
Number of Pins | 14 |
Weight | 4.535924g |
Operating Temperature | -40°C~125°C |
Packaging | Tube |
JESD-609 Code | e3 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 14 |
Termination | SMD/SMT |
ECCN Code | EAR99 |
Type | General Purpose |
Terminal Finish | Matte Tin (Sn) - annealed |
Subcategory | Comparator |
Max Power Dissipation | 830mW |
Technology | BIPOLAR |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 4 |
Supply Voltage | 5V |
Terminal Pitch | 1.27mm |
Time@Peak Reflow Temperature-Max (s) | 40 |
Base Part Number | LM2901 |
Pin Count | 14 |
Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Power Supplies | 5V |
Number of Circuits | 4 |
Nominal Supply Current | 2mA |
Power Dissipation | 830mW |
Output Current | 16mA |
Max Supply Current | 2mA |
Propagation Delay | 1.3 μs |
Quiescent Current | 2.5mA |
Turn On Delay Time | 1.3 μs |
Response Time | 1.3 μs |
Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
Output Current per Channel | 100pA |
Input Offset Voltage (Vos) | 7mV |
Voltage Gain | 106.02dB |
Supply Voltage Limit-Max | 36V |
Max Input Current | 250nA |
Dual Supply Voltage | 9V |
Input Bias Current | 250nA |
Voltage - Input Offset (Max) | 7mV @ 5V |
Current - Input Bias (Max) | 0.25μA @ 5V |
Natural Thermal Resistance | 105 °C/W |
Current - Output (Typ) | 16mA @ 5V |
Height | 1.65mm |
Length | 8.75mm |
Width | 4mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The LM2901D device consists of four independent precision voltage comparators, which are designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. These comparators also have a unique characteristic in that the input common-mode voltage range includes the negative rail even though operated from a single power supply voltage.
Wide single supply voltage range or dual supplies for all devices: +2 V to +36 V or ±1 V to ±18 V
Very low supply current (1.1 mA) independent of supply voltage (1.4 mW/comparator at +5 V)
Low input bias current: 25 nA typ.
Low input offset current: ±5 nA typ.
Input common-mode voltage range includes negative rail
Low output saturation voltage: 250 mV typ. (IO = 4 mA)
Differential input voltage range equal to the supply voltage
TTL, DTL, ECL, MOS, CMOS compatible outputs
Basic comparator
Driving CMOS
Driving TTL
Low frequency op-amp
Low frequency op-amp with boost
Transducer amplifier
Limit comparator
Crystal controlled oscillator
Time delay generator