LM2901DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901DG4 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type CMOS, MOS, Open-Collector, TTL is used for this comparator.The part will be shipped by Tube .14 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type General Purpose .The total number of elements is 4 .The device includes 14 pins.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.The comparator is equipped with 14 pins.You can search LM2901 if you are looking for more pin-to-pin solutions.There is 2.5mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.For normal use of the device, the nominal supply current should be 2mA .If the current supply exceeds 500μA , the comparator could malfunction.The device can be run with 5V power supplies.The voltage gain of the part is indicated by 100dB in the voltage formula.The operating supply voltage for normal operation should be 28V .
LM2901DG4 Features
CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901DG4 Applications
There are a lot of Texas Instruments LM2901DG4 linear comparators applications.
- Window Comparators
- Ultra-Low Power Systems
- Hand-Held Electronics
- Mobile Phones and Tablets
- Threshold Detectors
- Lithium ion battery monitoring
- Alarm and Monitoring Circuits
- Building automation
- Point of load regulators
- Self-diagnostics
