LM2901DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901DR Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, MOS, Open-Collector, TTL output.As a result, it is designed with Cut Tape (CT) package.As you can see, the comparator has14 terminals.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator has 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 14 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM2901 .There is a quiescent current of 2.5mA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current of the device be 2mA .A current supply greater than 500μA may cause the comparator to malfunction.The device can be powered by 5V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.A voltage gain of 100dB can be determined from the voltage formula for the part.Comparator electronics is necessary to have a voltage of 28V for normal operation.Comparator electronics is acceptable to pack the device by TR .
LM2901DR Features
CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901DR Applications
There are a lot of Texas Instruments LM2901DR linear comparators applications.
- Mobile Communications
- Appliances
- General-Purpose Portable Devices
- Automatic Test Equipment
- Motor drives
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Industrial
- Zero-Crossing Detectors
- Point of load regulators
