LM2901DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Packaging | Cut Tape (CT) |
| Published | 2005 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 800μA |
| Response Time | 1.3 μs |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.5V |
| Input Bias Current | 250nA |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2901DR2 Overview
In order to make transportation easier, it is packaged in SOIC .The comparator has a type TTL output.We ship the part through Cut Tape (CT) .The comparator has a total of 14 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Speaking of types, this is a typical General Purpose comparator.A total of 14 pins are included.There are 14 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM2901 .There is a quiescent current of 800μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 2mA .If the current supply exceeds 2mA , the comparator could malfunction.5V power supplies are enough to run the device.From the voltage formula, the voltage gain of the part is 100dB .There is no need to exceed 105°C in terms of temperature.Comparator electronics cannot be operated at temperatures below -40°C .The comparator has a maximum supply voltage of 36V .This comparator can be supplied with a voltage as low as 3V .To maintain the output quality, 4 channels work together.
LM2901DR2 Features
TTL output capability
General Purpose IC
Quiescent Current: 800μA
Voltage Gain: 100dB
LM2901DR2 Applications
There are a lot of ON Semiconductor LM2901DR2 linear comparators applications.
- Power Supervision
- Ultra-Low Power Systems
- Notebooks and PDAs
- General-Purpose, Low-Voltage Applications
- Consumer Medical Electronics
- Handheld Instruments
- Simple Analog-to-Digital Converters (ADCs)
- Power management
- Body Control Modules
- Wide Range VCO; MOS Clock Timers
