LM2901DRG3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901DRG3 Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, MOS, Open-Collector, TTL is used for this comparator.As a result, it is designed with Tape & Reel (TR) package.14 terminals are found on the comparator.Other Comparator like the device play a important role in the industry.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .In total, it contains 4 elements.A total of 14 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator is equipped with 14 pins.You can find more pin-to-pin solutions by searching LM2901 .A quiescent current of 2.5mA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 2mA .An excess of current supply over 500μA could result in malfunction of the comparator.The device can be run with 5V power supplies.You are allowed to input a maximum current of 250nA into the device.In accordance with the voltage formula, the part's voltage gain is 100dB .Often found in ADC circuits, this device is packed in TR .
LM2901DRG3 Features
CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901DRG3 Applications
There are a lot of Texas Instruments LM2901DRG3 linear comparators applications.
- Laptop Computers
- High-Speed Differential Line Receiver
- Analog front end
- Point of load regulators
- Portable and Battery-Powered Systems
- Appliances
- High-Speed Sampling Circuits
- Zero-Crossing Detectors
- Portable Battery Monitoring
- RC Timers
