LM2901DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901DRG4 Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, MOS, Open-Collector, TTL output type.Ready for shipping in Tape & Reel (TR) package.You can find 14 terminals of the comparator.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a General Purpose chip.In total, it contains 4 elements.The device is equipped with 14 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.There are 14 pins on the comparator.Search LM2901 to find more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 2mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .The device can be run with 5V power supplies.Electronic comparator is possible to input up to 250nA current into the device.From the voltage formula, the voltage gain of the part is 100dB .For normal operation, the operating supply voltage must be 28V .With a TR package, this device is designed for general use (usually in ADC circuits).
LM2901DRG4 Features
CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901DRG4 Applications
There are a lot of Texas Instruments LM2901DRG4 linear comparators applications.
- Portable and Battery-Powered Systems
- Infotainment & cluster
- Power Supervision
- Power management
- Simple Analog-to-Digital Converters (ADCs)
- Point of load regulators
- Wide Range VCO; MOS Clock Timers
- Window Comparators, Multivibrators
- RC Timers
- Metering Systems
