LM2901DT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 830mW |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Propagation Delay | 1.3 μs |
| Quiescent Current | 2.5mA |
| Turn On Delay Time | 1.3 μs |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Max Junction Temperature (Tj) | 150°C |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Ambient Temperature Range High | 125°C |
| Natural Thermal Resistance | 105 °C/W |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.75mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901DT Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with an output type of CMOS, DTL, ECL, MOS, Open-Collector, TTL is being used.The part will be shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .The device is equipped with 14 pins.The recommended mounting method is Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.Electronic comparator has 14 pins.You can find more pin-to-pin solutions for your special requirements by searching LM2901 .A quiescent current of 2.5mA is displayed by this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 2mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 2mA .The device can be powered by 5V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.In accordance with the voltage formula, the part's voltage gain is 106.02dB .Normal operation requires 28V operating supply voltage.
LM2901DT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM2901DT Applications
There are a lot of STMicroelectronics LM2901DT linear comparators applications.
- DC/DC and AC/DC power supplies
- Wide Range VCO; MOS Clock Timers
- Hand-Held Electronics
- High-Speed Differential Line Receiver
- RC Timers
- Lithium ion battery monitoring
- Consumer Medical Electronics
- Handheld Instruments
- High-Speed Sampling Circuits
- Mobile Phones
