LM2901DTBR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 18 hours ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901DTBR2G Overview
In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a type CMOS, Open-Collector, TTL output.Ready for shipping in Tape & Reel (TR) package.As you can see, the comparator has14 terminals.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .In total, it contains 4 elements.The board includes 14 pins.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~105°C .There are 14 pins on the comparator.You can find more pin-to-pin solutions by searching LM2901 .In this comparator, the quiescent current is 2.5mA .Electronic comparator is recommended that the nominal supply current be 2mA in order to use the device normally.If the current supply exceeds 2mA , the comparator could malfunction.The device can be powered by 5V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.Based on the voltage formula, the voltage gain of the part is 110dB .
LM2901DTBR2G Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~105°C
Quiescent Current: 2.5mA
Voltage Gain: 110dB
LM2901DTBR2G Applications
There are a lot of ON Semiconductor LM2901DTBR2G linear comparators applications.
- High-Speed Sampling Circuits
- Mobile Phones
- Zero-Crossing Detectors
- Analog front end
- Lithium ion battery monitoring
- Notebooks and PDAs
- DC/DC and AC/DC power supplies
- Portable Battery Monitoring
- Pulse, Squarewave, and Time Delay Generators
- High-Speed Differential Line Receiver
