LM2901HYDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LM2901HYDT Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, DTL, ECL, MOS, Open-Collector, TTL .Ready for shipping in Tape & Reel (TR) package.The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 4 elements in it.Electronic comparator includes 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The comparator is equipped with 14 pins.In order to find a solution that meets your specific needs, search LM2901 for more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.For normal use of the device, the nominal supply current should be 2mA .The device can be operated with 5V power supplies.The voltage formula shows that the part has a voltage gain of 106.02dB .Temperature higher than 150°C is not recommended.A temperature lower than -40°C is unsuitable for the device.A comparator part from the Automotive, AEC-Q100 series is used in this part.This device can be used in general (for example, in ADC circuits). It is packaged in TAPE AND REEL .
LM2901HYDT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM2901HYDT Applications
There are a lot of STMicroelectronics LM2901HYDT linear comparators applications.
- Metering Systems
- Portable Battery Monitoring
- Handheld Instruments
- Wearable Devices
- Power Supervision
- Multivibrators and High-Voltage Digital Logic Gates
- Self-diagnostics
- Notebooks and PDAs
- Power management
- Threshold Detectors
