LM2901M/NOPB
| Parameters | |
|---|---|
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 760mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 760mW |
| Output Current | 16mA |
| Max Supply Current | 800μA |
| Propagation Delay | 500 ns |
| Quiescent Current | 2.5mA |
| Turn On Delay Time | 500 ns |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
LM2901M/NOPB Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, DTL, ECL, MOS, Open-Collector, TTL is used for this comparator.This chip is designed with the Tube package.You can find 14 terminals of the comparator.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .There are 14 pins on this board.The recommended mounting method is Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.14 pins are present on the comparator.Try search LM2901 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 2.5mA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 2mA .Current supply exceeding 800μA could cause disfunction of the compartator.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.You are allowed to input a maximum current of 250nA into the device.In accordance with the voltage formula, the part's voltage gain is 100dB .
LM2901M/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901M/NOPB Applications
There are a lot of Texas Instruments LM2901M/NOPB linear comparators applications.
- Battery-Powered Electronics
- Window Comparators, Multivibrators
- Power Supervision
- System control and monitoring
- Window Comparators
- DC/DC and AC/DC power supplies
- Handheld Instruments
- Automotive
- Notebooks and PDAs
- Metering Systems
