LM2901MX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 760mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 760mW |
| Output Current | 16mA |
| Max Supply Current | 200μA |
| Quiescent Current | 2mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901MX/NOPB Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has a type CMOS, DTL, ECL, MOS, Open-Collector, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.This is a typical comparator of type General Purpose .Electronic comparator has a total of 4 elements.A total of 14 pins are included.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 14 pins.You can find more pin-to-pin solutions by searching LM2901 .This comparator presents a quiescent current of 2mA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 2mA .An excess of current supply over 200μA could result in malfunction of the comparator.This device requires 5V power supplies to operate.Electronic comparator is possible to input a maximum current of 250nA into the device.From the voltage formula, the voltage gain of the part is 100dB .The device is packaged in TR and is often used in ADC circuits.
LM2901MX/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 2mA
Voltage Gain: 100dB
LM2901MX/NOPB Applications
There are a lot of Texas Instruments LM2901MX/NOPB linear comparators applications.
- Power management
- Lithium ion battery monitoring
- Handheld Instruments
- Factory automation & control
- Metering Systems
- Consumer Medical Electronics
- Pulse, Squarewave, and Time Delay Generators
- Body Control Modules
- General Purpose Low Voltage Applications
- Ultra-Low Power Systems
