LM2901N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Max Power Dissipation | 1.05W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1.05kW |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Description
The LM2901N devices are made up of four separate voltage comparators that can operate over a wide variety of voltages from a single power supply. Dual-supply operation is also conceivable, as long as the voltage difference between the two sources is between 2 and 36 V and VCC is at least 1.5 V higher than the input common-mode voltage. The supplied voltage has no effect on the current drain. To achieve wired-AND relationships, the outputs can be coupled to other open-collector outputs. The LM2901N device is characterized for operation from –40°C to +125°C.
Features
? Common-Mode Input Voltage Range Includes Ground
? Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V
? Low Output Saturation Voltage
? Output Compatible With TTL, MOS, and CMOS
? On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
? Wide Supply Ranges
– Single Supply: 2 V to 36 V (Tested to 30 V for Non-V Devices and 32 V for V-Suffix Devices)
– Dual Supplies: ±1 V to ±18 V (Tested to ±15 V for Non-V Devices and ±16 V for V-Suffix Devices)
? Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical)
? Low Input Bias Current: 25 nA (Typical)
? Low Input Offset Voltage: 2 mV (Typical)
Applications
? Power Supervision
? Oscillators
? Peak Detectors
? Logic Voltage Translation
? Industrial
? Automotive
– Infotainment and Clusters
– Body Control Modules
