LM2901N/NOPB
| Parameters | |
|---|---|
| Thickness | 3.429mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.05W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1.05W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Propagation Delay | 500 ns |
| Quiescent Current | 2.5mA |
| Turn On Delay Time | 500 ns |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 3V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 5.33mm |
| Length | 19.177mm |
| Width | 6.35mm |
LM2901N/NOPB Overview
A convenient transport package is provided in 14-DIP (0.300, 7.62mm) .Output type CMOS, DTL, ECL, MOS, Open-Collector, TTL is used for this comparator.We ship the part through Tube .The comparator has 14 terminals.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as General Purpose .In total, it contains 4 elements.Electronic comparator has 14 pins.Electronic comparator is recommended that the mounting type be Through Hole .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.14 pins are present on the comparator.In order to find a solution that meets your specific needs, search LM2901 for more pin-to-pin solutions.A quiescent current of 2.5mA is displayed by this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 2mA .A current supply greater than 2mA may cause the comparator to malfunction.There is sufficient power to run the device from 5V power supplies.Comparator electronics follows that the voltage gain of the part is 100dB .The operating supply voltage for normal operation should be 3V .
LM2901N/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901N/NOPB Applications
There are a lot of Texas Instruments LM2901N/NOPB linear comparators applications.
- Notebooks and PDAs
- Zero-Crossing Detectors
- Threshold Detectors
- Alarm and Monitoring Circuits
- Multivibrators and High-Voltage Digital Logic Gates
- Wearable Devices
- Automatic Test Equipment
- RC Timers
- Body Control Modules
- Consumer Medical Electronics
