banner_page

LM2901N/PB

Through Hole Tube 16mA mA 700 ns μs Linear Comparators 100dB dB 250nA pA 500μA μA 7mV mV Through Hole


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM2901N/PB
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 434
  • Description: Through Hole Tube 16mA mA 700 ns μs Linear Comparators 100dB dB 250nA pA 500μA μA 7mV mV Through Hole (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type General Purpose
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Comparator
Technology BIPOLAR
Terminal Position DUAL
Number of Functions 4
Supply Voltage 5V
Base Part Number LM2901
Pin Count 14
Output Type CMOS, DTL, ECL, MOS, Open-Collector, TTL
Number of Elements 4
Power Supplies 5V
Nominal Supply Current 500μA
Power Dissipation 1.05W
Output Current 16mA
Max Supply Current 500μA
Quiescent Current 2.5mA
Response Time 700 ns
Voltage - Supply, Single/Dual (±) 2V~32V ±1V~16V
Input Offset Voltage (Vos) 7mV
Voltage Gain 100dB
Average Bias Current-Max (IIB) 0.5μA
Supply Voltage Limit-Max 36V
Input Bias Current 250nA
Voltage - Input Offset (Max) 7mV @ 5V
Current - Input Bias (Max) 0.25μA @ 5V
Current - Output (Typ) 16mA @ 5V
Height Seated (Max) 5.08mm
Length 19.18mm
Width 7.62mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LM2901N/PB Overview


For convenience, it is packaged in 14-DIP (0.300, 7.62mm) .Output type of this comparator is CMOS, DTL, ECL, MOS, Open-Collector, TTL .The chip is packaged with Tube .The comparator has 14 terminals.Other Comparator like the device play a important role in the industry.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical General Purpose comparator.A total of 4 elements can be found in it.Electronic comparator has 14 pins.Electronic comparator is recommended to mount using type Through Hole .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .14 pins are present on the comparator.If you require more pin-to-pin solutions, search LM2901 for more options.In this comparator, the quiescent current is 2.5mA .A Through Hole is provided for mounting on PCBs or other boards.Normal use of the device should require a nominal supply current of 500μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 500μA .A power supply of 5V is sufficient for the operation of the device.Based on the voltage formula, the voltage gain of the part is 100dB .

LM2901N/PB Features


CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB

LM2901N/PB Applications


There are a lot of Texas Instruments LM2901N/PB linear comparators applications.

  • Handheld Instruments
  • Appliances
  • Portable Battery Monitoring
  • Hand-Held Electronics
  • Point of load regulators
  • Limit Comparators
  • Ultra-Low Power Systems
  • Zero-Crossing Detectors
  • Power management
  • Wide Range VCO; MOS Clock Timers

Write a review

Note: HTML is not translated!
    Bad           Good