Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.209, 5.30mm Width) |
Number of Pins |
14 |
Weight |
208.312296mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
LM2901 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Collector, TTL |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
2mA |
Output Current |
20mA |
Max Supply Current |
2mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~30V ±1V~15V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.25μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
7mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
2mm |
Length |
10.3mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2901NSR Overview
The product is packaged in 14-SOIC (0.209, 5.30mm Width) in order to facilitate transportation.Output type CMOS, MOS, Open-Collector, TTL is used for this comparator.We ship the part through Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type Differential .A total of 4 elements can be found in it.There are 14 pins on this board.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.Electronic comparator has 14 pins.You can find more pin-to-pin solutions by searching LM2901 .The comparator displays a quiescent current of 2.5mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 2mA .If the current supply exceeds 2mA , the comparator could malfunction.A power supply of 5V is sufficient for the operation of the device.Input current to the device is limited to 250nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .The device is packaged in TR and is often used in ADC circuits.
LM2901NSR Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901NSR Applications
There are a lot of Texas Instruments LM2901NSR linear comparators applications.
- Analog front end
- Self-diagnostics
- Consumer Medical Electronics
- High-Speed Differential Line Receiver
- General Purpose Low Voltage Applications
- General-Purpose Portable Devices
- Handheld Instruments
- Ultra-Low Power Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Power Supervision