LM2901NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Output Type | TTL |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Current - Output | 20mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 250nA |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Max Dual Supply Voltage | 15V |
| Min Dual Supply Voltage | 1V |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LM2901NSRE4 Overview
Electronic comparator is packaged in SOP for convenient transportation.A comparator with a TTL output is used here.This package has been designed with Tape & Reel (TR) .As you can see, the comparator has14 terminals.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.The pinout of the component starts from 14 pins it has.14 pins are present on the comparator.There is 2.5mA current flowing in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires a nominal supply current of 2mA .If the current supply exceeds 2mA , the comparator might be damaged.In order to run the device, there are only 5V power supplies required.According to the voltage formula, the part has a voltage gain of 100dB .There is no recommendation for temperatures higher than 125°C .Comparator electronics will not be able to function at temperatures below -40°C .The comparator has a maximum supply voltage of 30V .A voltage of 2V is the minimum supply voltage allowed by this comparator.In order to maintain the quality of the output, 4 channels cooperate together.This comparator basically consists of a COMPARATOR amplifier with very high gain.The output current of this device is rated 20mA .
LM2901NSRE4 Features
TTL output capability
Quiescent Current: 2.5mA
Voltage Gain: 100dB
COMPARATOR amplifier
LM2901NSRE4 Applications
There are a lot of Texas Instruments LM2901NSRE4 linear comparators applications.
- High-Speed Differential Line Receiver
- Analog front end
- Self-diagnostics
- Portable Battery Monitoring
- Battery-Powered Electronics
- Window Comparators
- Metering Systems
- Point of load regulators
- Multivibrators and High-Voltage Digital Logic Gates
- Appliances
