LM2901PT
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 710mW |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Propagation Delay | 1.3 μs |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Natural Thermal Resistance | 100 °C/W |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
LM2901PT Overview
Electronic comparator is packaged in 14-TSSOP (0.173, 4.40mm Width) for convenient transportation.There is a CMOS, DTL, ECL, MOS, Open-Collector, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The device is designed with 14 terminations.The electrical component in this case belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator has a total of 4 elements.A total of 14 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 14 pins.You can find more pin-to-pin solutions for your special requirements by searching LM2901 .The comparator presents a quiescent current of 2.5mA volts.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 2mA .A current supply greater than 2mA may result in the comparator malfunctioning.The device can be operated with 5V power supplies.Input current to the device cannot exceed 250nA .Based on the voltage formula, the voltage gain of the part is 106.02dB .A normal operation requires a voltage of 28V .
LM2901PT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM2901PT Applications
There are a lot of STMicroelectronics LM2901PT linear comparators applications.
- Battery-Powered Electronics
- System control and monitoring
- Pulse, Squarewave, and Time Delay Generators
- Notebooks and PDAs
- Limit Comparators
- Automotive
- Metering Systems
- Window Comparators
- Zero-Crossing Detectors
- Factory automation & control
