Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 23 hours ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
LM2901 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Collector, TTL |
Operating Supply Voltage |
28V |
Power Supplies |
5V |
Number of Circuits |
4 |
Nominal Supply Current |
2mA |
Output Current |
20mA |
Max Supply Current |
2mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~30V ±1V~15V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.25μA |
Supply Voltage Limit-Max |
36V |
Dual Supply Voltage |
9V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
7mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2901PW Overview
In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, MOS, Open-Collector, TTL output on this device.The part is shipped by Tube .Electronic comparator is possible to find the 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A comparator of this type is typically of type Differential .A total of 14 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .There are 14 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM2901 .This comparator presents a quiescent current of 2.5mA .There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 2mA for normal use.A current supply greater than 2mA may cause the comparator to malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.The voltage gain of the part is indicated by 100dB in the voltage formula.For normal operation, there should be 28V operating supply voltage applied.
LM2901PW Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901PW Applications
There are a lot of Texas Instruments LM2901PW linear comparators applications.
- Battery-Powered Electronics
- Point of load regulators
- Wireless Base Stations
- Battery management and protection
- Automotive
- Metering Systems
- Window Comparators
- Portable and Battery-Powered Systems
- Wearable Devices
- Zero-Crossing Detectors