LM2901PWRG3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901PWRG3 Overview
In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, MOS, Open-Collector, TTL output.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has14 terminals.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as Differential .This is a 4 element comparator.Electronic comparator includes 14 pins.The type of mounting recommended is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.This comparator has 14 pins.You may wish to search LM2901 for more solutions that address your specific needs.As a result, this comparator displays a quiescent current of 2.5mA .A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 500μA for normal use.A current supply greater than 2mA may cause the comparator to malfunction.5V power supplies are enough to run the device.Input current to the device cannot exceed 250nA .Based on the voltage formula, the voltage gain of the part is 100dB .This device is usually used in ADC circuits (packaged in TR ).
LM2901PWRG3 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901PWRG3 Applications
There are a lot of Texas Instruments LM2901PWRG3 linear comparators applications.
- Automotive
- Security Detection Systems
- Lithium ion battery monitoring
- Zero-Crossing Detectors
- Appliances
- Multivibrators and High-Voltage Digital Logic Gates
- Simple Analog-to-Digital Converters (ADCs)
- Analog front end
- Consumer Medical Electronics
- Portable Battery Monitoring
