LM2901PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901PWRG4 Overview
In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, MOS, Open-Collector, TTL output type.As a result, it is designed with Tape & Reel (TR) package.There are14 terminals on the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical Differential comparator.A total of 4 elements can be found in it.The pinout of the component starts from 14 pins it has.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.The comparator is equipped with 14 pins.You can find more pin-to-pin solutions by searching LM2901 .There is a quiescent current of 2.5mA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 2mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 2mA .Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.From the voltage formula, the voltage gain of the part is 100dB .Normal operation requires 28V operating supply voltage.The device is acceptable to pack by TR .
LM2901PWRG4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901PWRG4 Applications
There are a lot of Texas Instruments LM2901PWRG4 linear comparators applications.
- Window Comparators
- Lithium ion battery monitoring
- Mobile Phones and Tablets
- Simple Analog-to-Digital Converters (ADCs)
- Metering Systems
- Window Comparators, Multivibrators
- Wireless Base Stations
- Hand-Held Electronics
- Ultra-Low Power Systems
- Current and voltage sensing
