LM2901QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 13 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901QDRQ1 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has an output type of CMOS, MOS, Open-Collector, TTL .The part is shipped by Cut Tape (CT) .14 terminals are found on the comparator.The electrical component here belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a Differential chip.The total number of elements is 4 .The pinout of the component starts from 14 pins it has.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator is equipped with 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search LM2901 .In this comparator, the quiescent current is 2.5mA .The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 2mA .A current supply greater than 2mA may cause the comparator to malfunction.A power supply of 5V is sufficient for the operation of the device.Electronic comparator is possible to input up to 250nA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 100dB .The part is based on Automotive, AEC-Q100 .The operating supply voltage for normal operation should be 9V .With a TR package, this device is designed for general use (usually in ADC circuits).
LM2901QDRQ1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901QDRQ1 Applications
There are a lot of Texas Instruments LM2901QDRQ1 linear comparators applications.
- Window Comparators, Multivibrators
- Infotainment and Clusters
- Self-diagnostics
- Zero-Crossing Detectors
- Industrial
- Battery-Powered Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Body Control Modules
- Window Comparators
- Ultra-Low Power Systems
