Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
LM2901 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Collector, TTL |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
-5mA |
Output Current |
20mA |
Max Supply Current |
-5mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.25μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Current - Quiescent (Max) |
2.5mA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2901QPWRG4Q1 Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, MOS, Open-Collector, TTL output on this device.This chip is designed with the Tape & Reel (TR) package.The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In terms of type, this is a typical Differential comparator.A total of 4 elements can be found in it.As a result, it contains 14 pins.The recommended mounting method is Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 14 .Try search LM2901 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 2.5mA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be -5mA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds -5mA .The device can be powered by 5V power supplies.Electronic comparator is possible to input a maximum of 250nA current into the device.In accordance with the voltage formula, the part's voltage gain is 100dB .Comparator electronics comes from the series of Automotive, AEC-Q100 comparator parts.The device is packaged in TR and is often used in ADC circuits.
LM2901QPWRG4Q1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901QPWRG4Q1 Applications
There are a lot of Texas Instruments LM2901QPWRG4Q1 linear comparators applications.
- High-Speed Sampling Circuits
- Zero-Crossing Detectors
- Portable Battery Monitoring
- Power management
- Ultra-Low Power Systems
- Mobile Phones and Tablets
- Current and voltage sensing
- Battery-Powered Electronics
- Pulse, Squarewave, and Time Delay Generators
- Security Detection Systems