LM2901VDR2G
| Parameters | |
|---|---|
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 22 hours ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
LM2901VDR2G Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Open-Collector, TTL .This device is designed in Tape & Reel (TR) case.The device is designed with 14 terminations.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 4 elements.As a result, it contains 14 pins.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.The comparator is equipped with 14 pins.You can find more pin-to-pin solutions by searching LM2901 .This comparator presents a quiescent current of 2.5mA .Normal operation of the device requires 2mA supply current.If the current supply exceeds 2mA , the comparator could malfunction.The device can be operated with 5V power supplies.Input current to the device cannot exceed 250nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .
LM2901VDR2G Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901VDR2G Applications
There are a lot of ON Semiconductor LM2901VDR2G linear comparators applications.
- Threshold Detectors
- RC Timers
- Automotive
- Simple Analog-to-Digital Converters (ADCs)
- Security Detection Systems
- General-Purpose, Low-Voltage Applications
- Pulse, Squarewave, and Time Delay Generators
- Portable and Battery-Powered Systems
- Automatic Test Equipment
- Limit Comparators
