LM2901VDTBR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2901VDTBR2 Overview
In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, Open-Collector, TTL output type.We ship the part through Tape & Reel (TR) .14 terminals are found on the comparator.Other Comparator like the device play a important role in the industry.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .Electronic comparator has a total of 4 elements.Electronic comparator has 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 14 pins on the comparator.You may wish to search LM2901 for more solutions that address your specific needs.There is a quiescent current of 2.5mA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 2mA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 2mA .A power supply of 5V is sufficient for the operation of the device.There is a maximum current that can be input into the device of 250nA .Based on the voltage formula, the voltage gain of the part is 100dB .
LM2901VDTBR2 Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901VDTBR2 Applications
There are a lot of ON Semiconductor LM2901VDTBR2 linear comparators applications.
- Point of load regulators
- Mobile Communications
- Infotainment & cluster
- Self-diagnostics
- Laptop Computers
- Battery management and protection
- Security Detection Systems
- Battery-Powered Electronics
- Power Supervision
- Infotainment and Clusters
